Fire Security Solutions

General The LCD-160 is a 640-character Liquid Crystal Display (LCD) annunciator and remote control for the NOTIFIER NFS-3030/ NFS2-3030 Fire Alarm Control Panel (FACP). The LCD-160 will mimic the top portion (160 characters) of the NFS-3030/ NFS2-3030’s 640-character display. This provides the event and preprogrammed custom messages as displayed on the main panel. The full screen contains soft key functions, and can display other panel information. LCD-160 Features • 640-character Liquid Crystal Display with backlit control. • On-board input, output, and status indicators to support diagnostics. • Software upgrades and foreign-languages character sets via serial port from a panel or other device using the Remote Data Port (RDP) interface. Upgrades do not require the replacement of any programmable devices. • Rubberized keypad. • Input for AKS-1B key switch. • Fits in two ACS annunciator module locations. • Display and Control Center (DCC) participation/indication

The Morley-IAS loop isolator module is used on the Morley-IAS intelligent fire   alarm control panels to protect the system against wire-to-wire short circuits on the analogue addressable loop wiring. The fault isolator modules should be placed between groups of sensors on the loop wiring to protect the loop if a short circuit fault occurs. If a short circuit fault occurs, the two isolators located either side of the short circuit fault will automatically sense the voltage drop, open their switches and remove the devices from the rest of the loop. If the line voltage then rises above a fixed threshold, indicating that the short circuit fault is removed, then the isolator module will automatically restore the power to the isolated group of devices.

Morley Max 2 Loop Fire Alarm PanelMAx panels are Multi-processor Fire Detection System suitable for system configurations of a wide range of installations. The system offers fire detection solutions integrated for many applications, like hotels, offices, hospitals, industrial environments and production facilities. MAx panels are not a simple FACP but an advanced very powerful fire detection system that uses the CanBus technology. This standard, originally designed for operation in industrial environments, makes the system highly resistant to external factors as electrical disturbances and other sources of false alarms. The system is certified in compliance with the standards EN 54-2, EN 54-4

• Power Source: Operates on a 9V DC battery for easy installation.
• Continuous Red LED Indicator: Provides a visual indication of the detector's status.
• Quick Reset Time: Resets in under 1 second after detection.
• High Sensitivity: Meets UL Standard with sensitivity of 2.26 ± 1.21% FT obscuration.

• Voltage: Operates on 24V DC, compatible with most conventional fire alarm systems.
• Material: Constructed from ABS plastic, offering durability and resistance to environmental factors.
• Sound Output: Delivers a loud alarm to alert individuals in the vicinity.
• Visual Indicator: Equipped with a flashing light to provide a visual cue of the alarm

• The central unit that monitors and controls the fire alarm system.
• Receives signals from detectors, initiates alarms, and may control other systems (like sprinklers, emergency lighting).
• Displays the status of the system (whether it’s in normal, alarm, or fault conditions).
• Can be connected to remote monitoring stations or networked with other building systems.

Notifier FST-851(A) Series intelligent plug-in thermal detectorswith integral communication has features that surpass conventionaldetectors. Point ID capability allows each detector’saddress to be set with rotary, decimal address switches, providingexact detector locations. FST-851(A) Series thermaldetectors use an innovative thermistor sensing circuit to produce135°F/57°C fixed-temperature (FST-851/A) and rate-ofrisethermal detection (FST-851R/A) in a low-profile package.FST-851H(A) provides fixed high-temperature detection at190°F/88°C. These thermal detectors provide effective, intelligentproperty protection in a variety of applications. FST-851(A) Series detectors are compatible with Notifier Onyx andCLIP series Fire Alarm Control Panels (FACPs).FlashScan® (U.S. Patent 5,539,389) is a communication protocoldeveloped by Notifier Engineering that greatly enhancesthe speed of communication between analog intelligentdevices and certain NOTIFIER systems. Intelligent devicescommunicate in a grouped fashion. If one of the devices withinthe group has new information, the panel’s CPU stops thegroup poll and concentrates on single points. The net effect isresponse speed greater than five times that of earlier designs

Notifier FSP-851(A) Series intelligent plug-in smoke detectorswith integral communication provide features that surpassconventional detectors. Detector sensitivity can beprogrammed in the control panel software. Sensitivity is continuouslymonitored and reported to the panel. Point ID capabilityallows each detector’s address to be set with rotary,decimal address switches, providing exact detector locationfor selective maintenance when chamber contaminationreaches an unacceptable level. The FSP-851(A) photoelectricdetector’s unique optical sensing chamber is engineeredto sense smoke produced by a wide range of combustionsources. Dual electronic thermistors add 135°F (57°C) fixedtemperaturethermal sensing on the FSP-851T(A). The FSP-851R(A) is a remote test capable detector for use withDNR(A)/DNRW duct detector housings. FSP-851(A) seriesdetectors are compatible with Notifier Onyx and CLIP seriesFire Alarm Control Panels (FACPs).FlashScan® (U.S. Patent 5,539,389) is a communicationprotocol developed by Notifier that greatly increases thespeed of communication between analog intelligent devices.Intelligent devices communicate in a grouped fashion. If oneof the devices in the group has new information, the panel’sCPU stops the group poll and concentrates on single points.The net effect is response speed greater than five times thatof earlier designs.

Sounders are designed to simplify installations to provide primary and secondary for fire and security applications. These are ideal where smaller notifications devices are desired. These sounders can be flush / ceiling mounted with / without back box.